18
4.5 Setting-up Requirements
4.5.1
Installation Location
•
The location must be even.
•
When choosing the installation location, the following must be kept in mind:
o
the air flow of the cooling air for the motor must not be restricted
o
forward and back flow connections must be easily accessible
o
all tubes must be installed without sharp bends
4.5.2
Environmental Conditions
Risk of damage due to unsuitable environmental conditions!
Damage to the unit and corrosion damage may result and are not covered by manufacturer’s
liability.
•
The unit is only authorized for use in indoor environments.
•
The unit must not be stored or operated in aggressive, humid environments.
•
The unit must not be stored or operated outdoor.
Pay attention to the environmental conditions as given in the specifications on page 17.
4.5.3
Infrastructure
The following infrastructure is required for connecting the unit:
Parameter
Rated value
Operating voltage
230 VAC, 50/60Hz
Table 8:
Required infrastructure
CAUTION
