https://www.lairdconnect.com/wireless-
4
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
This quick start guide describes how to configure the Sentrius
TM
gateway to forward LoRaWAN data to a cloud platform. The
steps listed in this guide use the RG191 (US version) gateway and an RM191 (US version) module. The steps for using an
RG186 and RM186 are similar.
Note
:
This guide uses The Things Network (TTN) to show how to register your Gateway and visualize the incoming
data on a Network server. If you are working with other network server vendors, please consult their user
guide for help with configuring the network server.
For more detailed information on how to use all the features of the Sentrius gateway, please see the Sentrius
TM
RG1xx User
Manual, available from documentation tab at:
https://www.lairdconnect.com/wireless-modules/lorawan-solutions/sentrius-
rg1xx-lora-enabled-gateway-wi-fi-ethernet
About the Gateway
The
Sentrius™
RG1xx
LoRa-Enabled Gateway
from Laird is the ultimate in secure, scalable, robust
LoRa solutions for end-to-
end control of your private LoRaWAN network. Leveraging Laird’s
field-
proven and reliable 50 Series “Wireless Bridge” certified module, it also offers
enterprise
dual-band Wi-Fi, BT v4.0 (BLE and Classic)
and
wired Ethernet
for complete design
freedom. Based on the
Semtech SX1301/SX1257 chipset designs
, it offers a
LoRa range up to 10
miles
and pre-loaded
LoRa Packet Forwarder software
, perfect for highly scalable, flexible IoT
networks. The Sentrius
TM
RG1xx Gateway works with Laird’s
Sentrius
TM
RM1xx
Series
LoRa+BLE certified modules for simple out-of-the-box integration and is compatible with
3rd party Cloud and LoRa partners, as well as any LoRaWAN certified client devices.
Figure 1: Top of the
Sentrius™
RG1xx
gateway
1.
LoRa and Wi-Fi antennas
2.
LEDs
3.
Mounting holes
4.
User button
Figure 2: Back panel of the
Sentrius™
RG1xx
gateway
1. DC power input
2. User button
3. Reset button
4. SD card slot
5. Ethernet connector
Summary of Contents for Sentrius RM191
Page 1: ...A Version 3 0 ...
