Laird SDC-EC15N, Hardware Integration Manual

Page: 9 / 17

SDC-EC15N
Hardware Integration Guide
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
9
© Copyright 2015 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0600
Certifications Wi-Fi Alliance
802.11a, 802.11b, 802.11g, 802.11n
WPA Enterprise
WPA2 Enterprise
Cisco Compatible Extensions (Version 4)
Warranty Limited Lifetime
All specifications are subject to change without notice
P
IN
D
EFINITIONS AND
I
NTERFACE
N
OTES
Pin Definitions
Pin # Pin Name I/O Power Supply Description Note
1 GND Ground
2 No Connect Not Used. Leave Open (Float)
3 No Connect Not Used. Leave Open (Float)
4 No Connect Not Used. Leave Open (Float)
5 No Connect Not Used. Leave Open (Float)
6 No Connect Not Used. Leave Open (Float)
7 No Connect Not Used. Leave Open (Float)
8 No Connect Not Used. Leave Open (Float)
9 VCC1_5 Primary 1.5 V Module Power
10 VCC1_5 Primary 1.5 V Module Power
11 WL_GPIO_1 Wake on Wireless LAN See Pin 11
12 VAUX_3_3 Auxiliary 3.3 V Module Power
13 PERST_L Module Reset
14 VCC3_3 Primary 3.3 V Module Power
15 VCC3_3 Primary 3.3 V Module Power
16 CLKREQ_L Reference clock request signal
17 No Connect Not Used. Leave Open (Float)
18 REFCLK_N Differential reference clock
19 REFCLK_P Differential reference clock
20 GND Ground
21 PERn0 Differential transmit
22 PERp0 Differential transmit
23 GND Ground
24 PETn0 Differential receive
25 PETp0 Differential receive
26 GND Ground