BT830 Hardware Integration Guide
Version 1.3
Embedded Wireless Solutions Support Center:
http://ews-support.lairdtech.com
www.lairdtech.com/bluetooth
37
Laird Technologies
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
E
UROPEAN
U
NION
R
EGULATORY
The BT830 has been tested for compliance with relevant standards for the EU market. BT830 modules were tested
with a 0.5 dBi chip antenna.
The OEM should consult with a qualified test house before entering their device into an EU member country to make
sure all regulatory requirements have been met for their complete device.
Reference the Declaration of Conformities listed below for a full list of the standards that the modules were tested to.
Test reports are available upon request.
EU Declarations of Conformity
BT830-SA and BT830-ST
Manufacturer:
Laird
Product:
BT830-SA / BT830-ST
EU Directive:
RTTE 1995/5/EC
Conformity Assessment:
Annex IV
Reference standards used for presumption of conformity:
Article
Number
Requirement
Reference standard(s)
3.1a
Health and Safety
EN60950-1:2006+A11:2009+A1:2010+A12:2011
3.1b
Protection requirements with respect to
electromagnetic compatibility
EN 301 489-1 V1.9.2 (2011-09)
EN 301 489-17 V2.2.1 (2012-09)
Emissions:
EN55022:2006/A1:2007 (Class B)
Immunity:
EN61000-4-2:2009
EN61000-4-3:2006/A1:2008/A2:2010
3.2
Means of the efficient use of the radio
frequency spectrum
EN 300 328 V1.8.1 (2012-06)
Declaration:
We, Laird, declare under our sole responsibility that the essential radio test suites have been carried out and that the
above product to which this declaration relates is in conformity with all the applicable essential requirements of
Article 3 of the EU Directive 1999/5/EC, when used for its intended purpose.
Place of Issue:
Laird
Saturn House, Mercury Park
Wooburn Green
HP100HH,
United Kingdom
tel: +44 (0)1628 858 940
fax: +44 (0)1628 528 382
Date of Issue:
July 2014
Name of Authorized Person:
Andrew Dobbing, Engineering Manager
Signature:
