Copyright © 2021 Laia · www.laiatech.com
23
All rights reserved
7.2.3 Set Camera Parameters
Step 1
Enter the GUI main interface.
Step 2
Select “Control > Camera Control > Camera Parameters > Set”.
Step 3
Set camera parameters such as image parameters, backlight settings, and
blink mode.
Step 4
View the set image effects on the display device.
Step 5
End.
7.3 Record Control
Control the recording and playback, and choose whether to enable USB recording,
remote recording or RTMP.
7.4 Main Video Source
Control the main video source, select HDMI, SDI or DVI as the main video source,
and the secondary video source defaults to DVI.
7.5 Conference Lock
Control the lock on the conference and choose whether to enable the conference
lock feature.
7.6 Video Layout
Control the screen layout to set the HDMI-1/SDI or HDMI-2 screen.
7.7 Power Control
Control the terminal power supply to select whether to shut down, restart, or
standby/wake up the conference terminal.
