LAI Games VIRTUAL RABBIDS THE BIG RIDE, Operator'S Manual

Page: 8 / 115

8
MACHINE INSTALLATION AND INSPECTION
When installing and inspecting
Virtual Rabbids: The Big Ride , be very careful of the following points
and pay attention to ensure that the players can enjoy the game safely.
•
Be sure to turn the power OFF before working on the machine.
•
Make sure the power cord is not exposed on the surface (floor, ground, etc.) where people walk.
•
Check that the rubber glide feet levellers are set correctly on the floor so that the game cabinet
is level and stable.
•
Always make complete connections for the integrated circuit (IC) logic PC Boards and other
connectors. Insufficient insertion can damage the electrical components.
•
Only qualified personnel should inspect or test the integrated circuit (IC) logic PC Boards.
•
If any integrated circuit (IC) logic PC Boards should need servicing, please contact the nearest LAI
Games Distributor (refer to the back page of this manual).
CAUTION:
Before switching the machine on be sure to check that the sticker next to the
AC main input plug indicates the correct voltage for your area!
WARNING:
Always turn OFF mains power before removing safety covers and refit all safety
covers when work is completed.
WARNING:
Do not use extension cords or power boards to power the game – it needs to be
connected to a single wall outlet only.
WARNING:
Only use the power cord supplied with your machine.