Page | 12
INTERNAL ACCOUNTING
VIEW INFORMATION
1.
While the game is in attract mode, press the S2 button.
2.
The drop OK button and joystick will flash to confirm that the accounting mode has been
entered.
3.
The credit display will now show a 1. This is the resettable coin counter audit number. The
internal displays will show the amount. The credit display will show the audit location (1),
and the internal display on the CPU will display the actual resettable count in memory at
that location (1).
4.
Press the drop OK button, and the credit display will change to display a 2. This is the
resettable prize counter. The internal displays will show the amount. The information at
Audit location 2 is displayed on the CPU like above.
5.
Press the drop OK button, and the credit display will change to display a 3. This is the non-
resettable coin counter. This is the resettable coin counter audit number. The internal
displays will show the amount. The information at Audit location 3 is displayed on the CPU
like above.
6.
Press the drop OK button, and the credit display will change to display a 4. This is the non-
resettable prize counter. The internal displays will show the amount. The information at
Audit location 4 is displayed on the CPU like above.
7.
Pressing the drop OK button again will cycle back to display a 1. The internal displays will
show the amount. The information at Audit location 1 is displayed on the CPU like above.
8.
To exit this mode, turn the game off, then on.
CLEAR INFORMATION
To clear the data stored in resettable counters (non-resettable counters cannot be reset), follow the
instructions below.
1.
While the game is switched off, hold down the S2 button and power the game on.
2.
The credit and internal displays (located on the circuit board) will start counting up number,
the joystick and drop OK button will flash, and music will play without stopping.
3.
Press the drop OK button to return to attract mode and normal operation.
4.
Drop a coin into the game to ensure that it is operating normally
