laguna Smart Shop M2, Owner'S Manual

Page: 27 / 75

Smart Shop "M" Maker 2 27
Securing the Workpiece
Mount Workpiece to the Tabletop
a. This can be done with the supplied table clamps (See Photo Below).
b. There exist a multitude of ways to secure your workpiece. Find what method works best for your application
before proceeding.
c. Always consider clearance between the router bit and table clamps. When the machine changes tools
it will need to travel to the back of the machine during program execution.
**Note: If using clamps, in software, set clearance height & border.**
Utilize T-Slots & Table Clamps Utilize Vacuum Table along with T-Slots.
Secure the workpiece to the Vacuum table