36
Revo 18|36 Lathe \ Setup Standard Accessories
Installing the Live (Rotating) Center
Parts Needed
REF
Description
Q
Installation Location
Rotating Center
1
Tailstock
·
Ensure that the bore of the tail stock is clean. The rotating center has a number 2 Morse Taper that fits
into the tail stock.
·
Push the center into the tail stock bore firmly, and ensure that it is securely located.
·
To remove the center, rotate the adjusting handle until it is as far back as possible and this will eject the
center.
Installing the Headstock & Tailstock Bracket
Parts Needed
REF
Description
Q
Installation Location
Headstock Bracket &
Hardware
1
Headstock
Tailstock Bracket & Hardware
1
Tailstock
The brackets are used to mount several accessories offered for the Revo line.
Headstock Bracket
Tailstock Bracket
Both Brackets Installed
