laguna Fusion 3, Owner'S Manual

Page: 78 / 81

Fusion 3 Table Saw \ Warranty \
66 © 2020 Laguna Tools
Warranty
This machine is covered by a warranty and the purchasing dealer can answer any questions you may have. Additionally, we
will always be here to offer support, service information, and product supplies and services.
Service: +1 (949) 474-1200
customerservice@lagunatools.com
Every product sold is warranted to be free
of manufacturers’ defective
workmanship, parts, and materials. For any
questions about this product, the intended use or what it was designed for, customer service, or replacement parts
–
please reach out to our customer service department.
Registration
To prevent voiding this warranty, all products
sold must be registered within thirty (30) days of
receiving. Registering the product will enable the
original purchaser to receive notifications about
important product changes and receive customer support.
https://lagunatools.com/policies/warranty/
What Is Covered?
Any part, determined by Laguna Tools®, to have a defect
will be repaired or replaced (and shipped), without charge. It
is required that the defective item/part be returned to
Laguna Tools® with the complaint and proof of purchase in
the original packaging that it was received. In the event the
item/part is determined to be void of this warranty, the
customer will be responsible for the cost to replace the
item/part and all related shipping charges.
Who Is Covered?
The applicable warranty covers only the initial purchaser of
the product from the receipt date. The original purchaser
must present the original receipt as proof of purchase.
Shipping Damage
Laguna Tools® and the purchasing customer is not
responsible for damage or loss caused by a freight
company or other circumstances not in the direct control of
Laguna Tools®. All shipping related claims for loss or
damaged goods must be made to Laguna Tools within
twenty-four hours of delivery.
Warranty Limitations
This limited warranty does not apply to natural disasters,
acts of terrorism, normal wear and tear, product failure due
to lack of maintenance or cleaning, damage caused by
accident, neglect, or lack-of/inadequate dust collection.
The warranty may be voided against proof of
misuse/abuse, damage caused where repair or alterations
have been made or attempted by others, using the product
for purposes other than those described as intended use
(unless with consent by Laguna Tools®), modification to
the product, or use with an accessory that was not
designed for the product. It is the responsibility of the user
to understand basic woodworking machinery settings and
procedures and to properly maintain the equipment in
accordance with the standards provided in this manual.
Length of Warranty
Aside from being free of defects upon receiving,
consumable parts, like cutters and abrasives, are not
covered by this warranty unless otherwise stated by Laguna
Tools®. These parts are designed to be used at the
expense of the operator and are available for replacement
or inventory purchase.
2 Year – New purchases through authorized dealers.
1 Year – New purchases directly from Laguna Tools.
1 Year – Blades and Accessories