laguna Fusion 3, Owner'S Manual

Page: 37 / 81

Fusion 3 Table Saw \ Setup \ Front Rail Pt. 2 & Control Switch
© 2020 Laguna Tools 37
Front Rail Pt. 2 & Control Switch
The Fusion F3 table
saw’s
front rail houses the control switch and front rail/guide ruler. The control switch allows the user
to quickly turn the machine on/off before and after making cuts. The front rail assembly provides the user with a guide to
measure the distance between the fence and the blade.
Quick Reference Guide
Add. Required Tools:

Level

General Wrench

13mm socket wrench (optional)
Troubleshooting/Tips:
Be sure to attach the control switch to the left front rail from
underneath the front left rail bracket. This will allow the left
front rail block to fit properly on the left front rail bracket.
Parts
REF Description Q Installation
Front Rail Assembly
(Rails previously assembly,
body is needed)
1 Body mounted to rail
Left Side Front Body (Rails
previously assembly, body is
needed)
1
F3 Table
Rail
Body
Control Switch 1 Bolts onto Left side Rail
Hardware
REF Description Q Installation
C
Hex Cap Screw w/ Flat Washer
(longer)
2 of 5 Control Switch, Left Front Rail
L
Hex Cap Screw w/ Flat Washer
(shorter)
9 of 9
Front Body to Front Rail (left &
right side)
Mounting the Control Switch to the Left Front Rail:
1. Align the bolt holes on the top of the control switch with the bolt holes on the bottom of the left front rail bracket.