laguna 37 x 2, Owner'S Manual

Page: 8 / 82

Double Drum Sander 37 x 2 8
General Information
IMPORTANT: BEFORE OPERATING YOUR SUPERMAX, READ THE INSTRUCTIONS IN THIS MANUAL FOR
UNPACKING AND SETTING UP YOUR MACHINE.
SUPERMAX OWNER’S MANUAL
CAUTION, SAFETY FIRST:
When maintaining and operating this machine, always put safety first. For your own safety, read and understand
this owner’s manual before operating this machine. Always heed and follow all nor- mal safety precautions,
including the following:
• Always wear eye protection while operating the sander.
• Always feed stock against the drum rotation.
• Never place hands or fingers under the drum or dust cover.
• Keep hands and clothing away from operating drums.
• Never operate the sander without its dust cover or drum and belt guarding in place.
• Always maintain control of boards to avoid kickback; know how to prevent it.
• Always disconnect electrical power before doing any servicing or adjusting of the machine.
MODEL IDENTIFICATION:
Your SUPERMAX Drum Sander is one of a family of machines from Supermax Tools designed to help you
achieve results comparable to industrial-size sanders at a fraction of the cost.
The
SUPERMAX is available in 25" or 37" Dual Drum Models .
For future reference, attach the Model/Serial # Bar Code label below or find the model and serial numbers on the
front table mount (#20, page 39) and write them in below:
Model:_____________ Serial Number:__________________
Date Purchased:____________ Dealer: _______________
CAUTION, IMPORTANT SAFETY INFORMATION:
FOR SAFE SANDING OPERATION, FOLLOW THESE GUIDELINES:
• BECOME FAMILIAR WITH THE PROPER OPERATIONAL PROCEDURES FOR USING THIS MACHINE.
• ALWAYS BE SAFETY CONSCIOUS WHEN OPERATING THE MACHINE.
• ALWAYS WEAR EYE PROTECTION WHILE OPERATING THE SANDER.
• ALWAYS FEED STOCK AGAINST THE ROTATION OF THE DRUM(S).
• NEVER PLACE HANDS UNDER THE DRUM(S) OR DUST COVER.
• NEVER OPERATE SANDER WITHOUT ITS DUST COVER OR DRUM AND BELT GUARDING IN PLACE.
• KEEP HANDS AND CLOTHING AWAY FROM OPERATING DRUM(S), BELT AND PULLEYS.
• ALWAYS MAINTAIN CONTROL OF STOCK TO AVOID KICKBACK; KNOW HOW TO PREVENT IT.
• ALWAYS DISCONNECT ELECTRICAL POWER BEFORE PERFORMING ANY SERVICING OR ADJUSTMENT