Lagoon 52 F, User Manual

Page: 47 / 144

RIGGING / SAILS
45
3
RIGGING / SAILS
„
3.3
Running rigging
„
3.2
Standing rigging
The LAGOON 52 F has been adjusted by the shipyard and by the mast
manufacturer when first masting.
The cables stretch a little during the first sailings. Therefore it is
advisable to have the mast inspected and adjusted by a specialist.
Before you put out to sea, it is essential to make sure that the standing
rigging is in good condition: inspect the gooseneck, turnbuckles, and
check the condition of the shrouds.
To hoist a crew member up to the top of the mast, use the man
hoisting halyard.
Belay the crew member with a bowline on the bosun’s chair ring (do
not use snap shackle or shackle).
LAGOON 52 F
RECOMMENDATION
Any intervention on the standing rigging comes
within a specialist remit.
WARNING
The man hoisting halyard which is the only one to be
authorized for this purpose, is only meant to hoist a
crew member up to the top of the mast.
Description of the ropes length (m) diameter (mm)
Mainsail halyard 56 + 14 12 + 10
Mainsail topping lift 57 12
Genoa halyard
(tensioning mast step)
18,5 10
Genoa lowering halyard 30 8
Reef 1 16 + 8 14 + 10
Reef 2 17 + 16 14 + 10
Reef 3 18 + 25 14 + 10
Mainsail sheet 30 14
Self-tacking jib sheet 29 14
Genoa furling line 29 10
Code 0 halyard 50 + 35 14 + 12
Code 0 / spinnaker sheet 40 14
Staysail halyard 50 14
Man hoisting halyard 55 10
Reef cunnigham 1 13 14
Reef cunnigham 2 18 14
Reef cunnigham 3 23 14
Port traveller adjustment 13 10
Starboard traveller adjustment 17 10