VitalsBridge Directions for Use
15
rev. A.5
Temperature (All Models)
The VitalsBridge simulates the output of YSI 400-compatible temperature transducers.
Configuring ECG
1.
Locate the temperature cables. They are short white cables that have an RJ-11 connector on one end and a
transducer connector on the other.
2.
Plug the RJ-11 connector end into the VitalsBridge.
3.
Connect the transducer end to the temperature cable coming from the patient monitor.
4.
Once connected and with the VitalsBridge powered on and initialized, a reading should appear on the patient
monitor after a few moments.
Summary of Contents for VitalsBridge 100
Page 1: ......
