19
Warranty Information
This manual provides the installation, safety and operating instructions for the Electric Glass
Boiler. We recommend all installation, operating and safety instructions appearing in this manual
to be read before installation or operation.
Electric Glass Boiler is a product of extensive research and field testing. The materials used
were selected for maximum durability, attractive appearance and optimum performance.
Every unit is thoroughly inspected and tested before shipment.
IMPORTANT! Keep these instructions for future reference.
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug Electric Glass Boiler into a properly grounded electrical outlet of the correct voltage,
size, and plug configuration. If the plug and receptacle do not match, contact a qualified
electrician to determine the proper voltage and size, and install the proper electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit from the power source and
allow to cool before performing any maintenance.
3.- For safe and proper operation, the unit must be located at a reasonable distance from
combustible walls and materials. If safe distances are not maintained, discoloration or
combustion could occur. Do not locate Electric kettle under shelving or closer than 12"
(31 cm) from the ceiling.
4.- Allow a minimum of 12" (30 cm) clearance along the sides. Allow a clearance of 20" (50 cm)
along the front and rear discharge to endure proper operation and safety.
5.- To prevent any injury or damage do not pull unit by power cord.
6.- To prevent any injury, discontinue use if power cord is frayed or worn.
MAIN TECHNICAL SPECIFICATIONS
MODEL:
69292
VOLTAGE:
220-240V/50Hz
POWER:
2.200 W
.
CAPACITY:
1,70 Lt.
TEMPERATURE RANGE:
50ºC - 95ºC
DIMENSIONS:
23x23x32
cm.
WEIGHT:
2,40
Kgr.
WORTHY INFORMATION
WARNING
!
