21
OPERATION
1.- Take off the wrapping before using the electrical appliance. Do not throw away the wrapping
until you have checked that the appliance functions properly.
2.- Make sure you place the machine onto a flat, hard surface. Avoid contact with excessively
warm areas. Check that the connecting wire and the power point are in perfect condition.
3.- This machine was designed to vacuum-pack solid, dry products.
DO NOT USE IT WITH
LIQUIDS OR SAUCES
. They may permanently damage the suction pump. If you wish to
pack sauces, freeze them first and, when they are completely hardened, vacuum-pack them.
4.- The bag is sealed using heat, so the necessary safety measures must be followed to avoid
personal injuries.
5.- The bags/reels supplied have been specially manufactured for use with food products. The
heat supplied during the sealing operation was established according to the thickness and
quality of the bags/reels supplied, so the appliance may not work with bags/reels supplied by
other manufacturers.
6.- Do not leave the machine functioning when empty. Prolonged uses can have a negative
effect on the suction pump's lifespan. If the motor overheats, switch it off immediately and
wait for it to cool before using it again.
7.- The "STOP" button cancels and stops the machine immediately at any stage.
8.- Before starting to use the machine, have all the required materials like food products,
vegetables, etc. at hand, as well as scissors, if necessary.
9.- If a plastic reel is used for packing, proceed as follows;
a.- Select the desired length and cut with the scissors as straight as possible.
b.- Place one of the open sides inside the machine to proceed to seal.
c.- Close the lid and make sure it is properly locked.
d.- Press the "Seal Only" button and a light will come one during the sealing process.
e.- When the light turns off, press the side opening buttons to be able to open the lid.
f.- Now proceed as though it were a bag.
10.- If plastic bags are used for packing, proceed as follows;
a.- Put the product inside the bag and make sure it is in dry conditions.
b.- Place the open side of the bag inside the machine between the suction nozzle and
the lower vacuum pad.
c.- Close the lid and make sure it is properly locked.
d.- Press the "Vacuum & Seal" button and a light will come on during the vacuum
process.
e.- Once the product has been vacuumed, the sealing will start automatically, so this
function's light will come on.
f.- When the sealing light turns off, press the side opening buttons to be able to open
the lid.