background image

7. Warranty

page 25

LaCie blue eye 2

User’s Manual

7. Warranty

LaCie warrants your device against any defect in material and workmanship, under normal use, for the period designated
on your warranty certificate. In the event this product is found to be defective within the warranty period, LaCie will, at its
option, repair or replace the defective device.

This warranty is void if:
• The device was operated/stored in abnormal use or maintenance conditions;
• The device is repaired, modified or altered, unless such repair, modification or alteration is expressly authorized in writ-
ing by LaCie;
• The device was subjected to abuse, neglect, lightning strike, electrical fault, improper packaging or accident;
• The device was installed improperly;
• The serial number of the device is defaced or missing;
• The broken part is a replacement part such as a pickup tray, etc.
• The tamper seal on the device casing is broken.

LaCie and its suppliers accept no liability for any loss of data during the use of this device, or for any of the problems
caused as a result. 

LaCie will not, under any circumstances, be liable for direct, special or consequential damages such as, but not limited to,
damage or loss of property or equipment, loss of profits or revenues, cost of replacement goods, or expense or inconven-
ience caused by service interruptions.

Any loss, corruption or destruction of data while using a LaCie device is the sole responsibility of the user, and under no
circumstances will LaCie be held liable for the recovery or restoration of this data.

Under no circumstances will any person be entitled to any sum greater than the purchase price paid for the device.

To obtain warranty service, call LaCie Technical Support. You will be asked to provide your LaCie product’s serial number,
and you may be asked to furnish proof of purchase to confirm that the drive is still under warranty.

All drives returned to LaCie must be securely packaged in their original box and shipped with postage prepaid.

Important Info:

Register online for free technical support:  

www.lacie.com/register

Summary of Contents for blue eye 2


























Reviews: