Notes
page 8
LaCie 120 Monitor
User’s Manual
GENERAL NOTES
The screen surface is very soft. Do not rub, touch or tap the screen surface with sharp object such as pen or pencil. This con-
tact may scratch or damage the screen. These damages are not covered under the warranty.
• Turn your computer OFF before installing your new monitor. Refer to your computer manual for the proper shut down pro-
cedure.
• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally packed at the factory.
• To keep the monitor looking new, periodically clean the case & surface of the TFT-LCD panel with a soft non-fibrous cloth
lightly dampened with a glass cleaner. Do not use any paper products to clean the screen. Never use strong solvents such as
thinner, benzene, or abrasive cleaners, since these will damage the case & panel. As a safety precaution, always unplug the
monitor before cleaning it.
• Plug & Play DDC1/2B Feature - This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC
STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communi-
cate additional information about its display capabilities. The communication channel is defined in two levels, DDC1 and
DDC2B. The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID information.
The DDC2B is a bidirectional data channel based on the I_C protocol. The host can request EDID information over the DDC2B
channel.
• This monitor will appear to be non-functional if there is not video input signal. In order for this monitor to operate properly,
there must be a video input signal.
The following is a copy of your monitor’s rating label that summarizes all the certifications that
this monitor conforms to. For esthetic considerations, this label is physically located on the back
of the monitor under the square VESA attachment that connects your monitor panel to the stand.
Should you want to access it, simply unscrew the four connecting screws and separate the stand
from the panel. The serial number of your product can be found on a separate barcode sticker
also located on the back of the monitor in the vicinity of the DVI connector.
This symbol on the product or on its packaging indicates that this product must not be disposed of with you
other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it
over to a designed collection point for the recycling of waste electrical and electronic equipment. The sepa-
rate collection and recycling of your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and the environment. For
more information about where you can drop off your waste equipment for recycling, please contact your
local city office, your household waste disposal service or the shop where you purchased the product.
•
