USER’S MANUAL
Do not use a steam cleaner to clean the range.
Gas hobs :
The burners are made in two parts in order to facilitate cleaning. Clean them separately,.
→ Burner cap :
Burner caps are made of solid brass. Use a special brass-cleaning product (e.g. MIROR
®
or
BRASSO
®
) and a soft cloth.
If the product runs onto the enamel do not rub (these products generally contain
abrasives). Rinse immediately with clean water without rubbing.
If the caps are very dirty polish them with very fine sand paper and then rub them with a copper
cleaner.
→ Burner body :
The aluminium bodies of the burners become stained with use. They should be cleaned regularly
with a scouring pad (Scotch Brite
®
).
After removing the pan supports and burners, the cooking surface can be cleaned easily and
thoroughly by simply using a sponge.
Do not use scouring pads or abrasive products such as oven cleaners and stain removers.
When cleaning, be careful not to splash liquid into the openings of the burners.
Traditional Hob (Simmer Plate) :
Do not use water to clean the simmer plate when it is hot. This can damage it.
Immediately remove any spillages to make cleaning easier.
Use a sponge moistened with soapy water or scouring powder.
Radiant Electric hob :
Hotplates must ALWAYS be kept dry. Wipe your pans before placing them on the hotplates.
Limescale can be removed by using white wine vinegar. Cover the marks with a cloth soaked in wine
vinegar and leave for 1/2 h before carefully rinsing and drying.
Marks made by metal or superficial deposits which remain after the standard cleaning described
above can be removed by using a liquid product for cleaning stainless steel pans (e.g. cream
stainless steel ZIP ®, stainless steel PPZ ®, etc.).
The stainless steel frame can be cleaned by using a damp sponge with a mild detergent for stubborn
marks (e.g. CIF Ammoniacal ®, etc.).
If any sugar-based syrup falls on the glass ceramic hob during use, leave the element switched
to position 1, and, using a razor blade scraper (such as CERA Quick) IMMEDIATELY remove the
remaining burnt-on layer.
CAUTION
If there is any visible sign of a surface crack, immediately isolate appliance from the
electrical supply to prevent risk of electric shock. Contact your installer.
Before any cleaning work, close the gas supply and/or isolate from
the mains electricities supply
CLEANING AND MAINTENANCE
Sully - Ft 124a - GB - Rév 06 - Modifié le : 07/10/2013 39/42
