47
6.4
Recording probe data
Data can be recorded simultaneously from all probes. Choose
File >Measurement File Naming
to select how the recorded data will be saved:
Naming settings for new measurements dialog box
•
If you choose
Do not auto-name
, uScope will prompt you for a file name and location
for each new recording.
•
Choose
Auto-name files
to automatically name each recording. Check
Append the
date
,
Append the time
, and/or
Append counter
to add these values to the new file
names. An example of how the name will appear is shown at the bottom of the dialog
box.
Note
:
You can currently only save the probes in the tab-delineated text spreadsheet
file format.
•
To begin recording choose
File >Record
, or click the
Start/Stop
toolbar button. If
Auto-naming is selected, recording will begin immediately. Otherwise, recording will
begin after you name the file and click
OK
.
•
To end recording, choose
File > Record
or click the
Start/Stop
button again.
