6
AmpliFi User Guide
Chapter 2: Devices
ULabs
General
The
General
screen for the Router allows you to access
device settings . Tap to save your changes .
General
•
Device Name
Displays the descriptive name of the
Router . Tap to change it .
Time
•
Time Zone
Select the appropriate time zone for your
location .
•
24-Hour Time
Select this option to display the time
in 24-hour format (for example, 6:00 pm is displayed as
1800) .
Brightness
•
LCD
Use the slider to adjust the brightness of the Router’s
LCD screen .
•
LED
Use the slider to adjust the brightness of the Router’s
bottom LED .
•
Night Mode
Enabled by default, the LCD screen turns off
at night .
-
Night Mode
We recommend keeping this option
enabled to avoid any disturbance from the backlight
and preserve the LCD screen .
-
Begins
Change the time that Night Mode activates .
-
Ends
Change the time that Night Mode deactivates .
Tap to save your changes .
Sound Effects
•
System Sound
Enabled by default . The Router emits
notification sounds when an action is complete (for
example, when a setting is saved) .
•
Tap Sound
Enabled by default . The Router emits a sound
every time you tap on the screen .
Tap to save your changes .
Actions
•
Locate
The LED of the Router flashes several times .
•
Change Password
You can change the administrator or
device password .
-
Password
Enter the new password .
-
Verify Password
Enter the new password again .
-
Show Password
Disabled by default . Select this option
to display the password in plain text .
Tap to save your changes .
•
Reboot
Restarts the Router .
•
Factory Reset
Resets the Router and all online Mesh
Points to factory default settings .