Labrie Top Select, Maintenance Manual, Page: 24 / 145

16
Safety
Putting the Body Safety Prop Back in Place
To put the body safety prop back in place:
1. Make sure that there is enough clearance above the body to raise it safely.
2.
Start the engine.
3. Turn ON the pump switch.
4.
Raise the body until the safety prop can move freely.
5. Put the safety prop back in its place.
6.
Lower the body completely.
7. Turn OFF the pump switch.
8.
Stop the engine.
Tailgate Safety Prop
The tailgate safety prop is used to support and keep the tailgate open during inspection or
maintenance procedures. It is mandatory to set the safety prop every time the tailgate is open for such
purposes.
I
MPORTANT
:
Make sure that the body is empty before using safety props.
Setting the Tailgate Safety Prop
To set the tailgate safety prop:
1. Make sure that the body is empty.
2.
Remove the tailgate-locking safety pin.
The tailgate safety prop shall be set each time the tailgate is open for inspection or
maintenance purposes.
Always use the tailgate safety prop when working under a raised tailgate. The prop must be
used even if the tailgate is fully raised. Failure to do so may cause serious injury or even
death.
WARNING!
WARNING!