Labrie MINIMAX, Operator'S Manual

Page: 43 / 113

Safety 35
Figure 2-17 Hydraulic pump O
N
/O
FF
switch
Cleanliness
Cleanliness is part of safety. Ensure that the equipment works properly by removing any compacted
garbage in the packer area after each body unloading.
Clean all the lights and safety decals so you and the surrounding pedestrians and drivers will be aware
of the truck at all times. Use the hoe to rake dirt out of the clean-out traps on each side of the vehicle.
Figure 2-18 Clean-out trap access door
Locking Out and Tagging Out the Vehicle
For any inspection, repair or general maintenance being done on the vehicle, whether on the road or
at the shop, it is the employer’s responsibility to establish and see to the application of a proper
lockout and tagout procedure.
Warning!
Make sure that the clean-out trap access door on the right-hand side is closed before
using the automated arm. Otherwise, the arm will collide with the door.