Labrie EXPERT, Maintenance Manual, Page: 195 / 425

General Maintenance
185
Figure 3 - 265 Anti-spill guard
Figure 3 - 266 R-pin holding anti-spill guard in place
6. Remove the hopper divider (see Figure 3 - 267).
There are 6 bolts that hold the divider to the packer panel. These bolts are to be taken out to
remove the hopper divider. A 5/8” nut located at the rear end of the divider must also be taken
out (see Figure 3 - 269).
Figure 3 - 267 Hopper divider