Labrie EXPERT, Maintenance Manual

Page: 167 / 425

General Maintenance
157
Figure 3 - 220 Chute
N
OTE
: The E
XPERT
™ may be equipped with a dual split crusher panel, or a single split crusher panel
which would be located either on the right-hand side or on the left-hand side of the hopper
(see Figure 3 - 23).
9 d.
Turn OFF the hydraulic pump and the engine.
9 e.
Lock out and tag out the vehicle (see Locking Out and Tagging Out the Vehicle on page 14).
9 f.
Remove both protective panels that are fixed to the rear hopper wall (see Figure 3 - 221).
Figure 3 - 221 Protective panels
N
OTE
: On some trucks, especially those with a single split crusher panel, the crusher panel deflector
also needs to be removed (see Figure 3 - 222).
Once the protective covers are removed, you will be able to access the area where the chute
cylinder and the rear end section of the chute shaft are.