Labrie Automizer Versa Hand, Maintenance Manual

Page: 21 / 190

Safety 13
Putting the Body Safety Prop Back in Place
To put the body safety prop back in place:
1.
Make sure that there is enough clearance above the body to raise it safely.
2.
Start the engine.
3.
Raise the body until the safety prop can move freely.
4.
Put the safety prop back in its place.
5.
Lower the body.
Tailgate Safety Prop
Setting the Tailgate Safety Prop
The tailgate safety prop is used to support and keep the tailgate open during inspection or
maintenance procedures. It is mandatory to set the safety prop every time the tailgate is open for such
purposes.
I
MPORTANT
: Make sure that the body is empty before installing safety props.
Figure 2-5 Tailgate safety prop
Danger! The safety prop shall be set each time the tailgate is opened for inspection and
maintenance purposes.