LABORIE Solar Blue, Service & Installation Manual

Page: 56 / 198

© 2008
– 2020 by MMS B.V.
55
4.2.8 EMG connection
The Solar Blue module is equipped with one EMG input (DIN-5).
Figure 4.12 EMG input
EMG cables and electrodes
The following types of EMG cables/leads and electrodes are recommended to
use with the Solar Blue module:

EMGC-D5-SUR (= guarded EMG cable with DIN-5 connector and
integrated DIN 42 802 and 3 electrodes with press studs, 180 cm).

EMGC-TP-SUR (= guarded EMG lead wires with press studs and DIN-
42802, set of 3), to be used with EMGC-D5-TP (= guarded EMG cable for 3
electrodes with DIN-42802 and DIN-5 connector, 180 cm).

MMS EMG-PE (= disposable waterproof protected EMG surface electrodes
including lead wires) to be used with EMGC-D5-TP (= guarded EMG cable
for 3 electrodes with DIN-42802 and DIN-5 connector, 180 cm).
Figure 4.13 EMGC-D5-SUR cable
Figure 4.14 EMGC-D5-TP with
EMGC-TP-SUR lead wires