LABORIE Nexam Pro CIM, User Manual

Page: 170 / 278

170 Nexam Pro User Manual Chapter 10
Figure 10.7 Channel settings
In this window, you can define the channels to be measured. To enable a
channel, the setting Off in the column Position must be set to a position on
the screen, for example position 1. Click the channel in the list and change the
position in the lower part of the window. Click OK to save the changes and to
return to the Edit investigation protocol window.
10.5.2 Biofeedback Settings
The Biofeedback settings window can be opened in different ways.
If you want to save the changes as default protocol settings, do the following:
•
In the Edit investigation protocol window, click the More button. To save
the changes, click OK .
If you want to change the settings only for the current patient, do the following:
•
Start the pre-test for the current patient. The Biofeedback settings window
will display automatically.
•
During the pre-test or investigation, click the More tab and then click the
Edit challenge tool button.
•
To save the changes, click OK .