Laboratory2 SOROKA-10E, Operational Manual, Page: 16 / 18

Laboratory2, LTD
Page16
Version of 05.09.2019
If the logger is turned on (see. 2.6 (i)) and voice recorder is switched off (except
emergency reset) logger is recorded to micro SD into the file INF_REG.TXT.
It is not recommended to use the logger continuously since this reduces nonvolatile
memory resource of the voice recorder (it only affects work of the logger itself).
Brief description of the recorded events and the logger structure is given in Table 4.
Table 4. Description of logger tags and events.
Shorthand Description
DEVICE_NUMBER Voice recorder identification number
POWER_RESET Reset by power failure
PIN_76_RESET Processor hardware reset
PMMSWBOR For official purposes
WAKE_UP_FROM_LPX.5 For official purposes
SECURITY_VIOLATION For official purposes
SVSL For official purposes
SVSH For official purposes
SVML_OVP For official purposes
SVMH_OVP For official purposes
PMMSWPOR For official purposes
WATCH_DOG_TIME_OUT Looping / stop of the processor’s program due to
memory card or software failure
WDT_PSWRD_VIOLATION For official purposes
FLASH_PSWRD_VIOL For official purposes
PLL_UNLOCK For official purposes
PERF_AREA_FETCH For official purposes
PMM_PSWRD_RESET Forced software reset (occurs when overwriting voice
recorder microprocessor program). Is called forcibly.
LOW_VOLTAGE_TURN_OFF Low Battery - The recorder is turned off
BUTTON_TURN_OFF Voice Recorder is turned off by pressing
BUTTON_TURN_ON Turning the voice recorder on by pressing
SD_MEMORY_IS_OVER No free space on the microSD - the voice recorder is
switched off
ALARM_TURN_OFF Voice recorder is turned off by timer
ALARM_TURN_ON Voice recorder is turned on by timer
SD_READ_TIMEOUT Micro SD does not respond to a command to read data
SD_WRITE_FAILURE Command to record data do not pass to micro SD
NO_SD_BLKWR_RESPONSE There is no confirmation from mcroSD to the recording
data block
PROGRAM_BOR_RESET Complete reset of the voice recorder. Called forcibly,
if the voice recorder has not detected a microSD
memory card or if the memory card of filing system
contains errors.
SNMI_INTERRUPT Microprocessor system failure (it is necessary to save
the file INF_REG.TXT)
FLASH_ACCESS_ERROR Error of the program (it is necessary to save the file