Laboratory 2,LTD
Version of
12.05.2020
Page 7
b)
Protect the voice recorder and external microphones from mechanical shocks –
severe bumps may lead to possible destruction of the microphone.
If the voice recorder,
received mechanical damage during operation, and this led to its failure, it is not covered
under warranty any more.
c) Do not allow dust and moisture on the microphones, as it can lead to significant
deterioration in the performance of the microphone.
2.2 Charging the internal accumulator.
Connect the USB cable for charge to the voice recorder and then plug it into the USB
port of your computer.
If the accumulator of the voice recorder is discharged, the indicator "Charge" lights up
in red. Once fully charged, the accumulator indicator "Charge" will turn green. The charging
time of a fully discharged battery is approximately 2-3 hours.
Attention! If you want to keep the recorder for storage for over than 1 month,
completely charge.
2.3 Charging the external accumulator
Connect the supplied charger to the accumulator, and then plug it into the mains supply
220V.
If the accumulator is discharged, the indicator on the charger will light up red. Once fully
charged, the accumulator charge indicator lights up in green. The charging time of a fully
discharged accumulator with capacity of 1 A.h. is about 2 hours.
Attention! If you want to keep the recorder for storage for over than 1 month,
completely charge.
2.4 Setting parameters of the voice recorder.
Insert the micro SD card into the card reader. Format the micro SD under the file system
FAT32.
Create a folder with any name on your computer.
Copy the
dict.exe
program from the supplied CD disk into the created directory.
