INSTALLATION
Remove all parts from the packing carefully.
1.
Remove the plastic cover (1) from the microscope to make room for
the fluorescence attachment.
Bring the nosepiece to the maximum height by rotating the coarse
knob (2) anti- clockwise. Remove the illumination power cable
before
removing the cover. Apply similar pressure by thumbs on the
inner
sides of the panel (3 & 4) to push it out. Refer to figure 1 and
2.
2.
Join the Optical assembly and illumination assembly to complete the
FL attachment. Guide the illumination assembly to the optical
assembly. Secure both parts by the allen screws (1) provided. Refer
Fi
g.
3.
3.
Assemble attachment in the microscope as shown in Fig. 4 and
secure it with 3 Nos of Screws. Then install filter in the guide slot as
shown in Fig. 5.
Fluorescence Attachment User Guide
4
Fig. 4
Fig. 3
Fig. 5
Fig. 1
Fig. 2
2
3
4
1
1
Summary of Contents for TCM 400 FLR
Page 2: ...TCM400Flr...
