Instruction manual for CoolSafe
01032016QA01
Item No. 701157
CopyRight © 2016
Page
13
of
25
Press “Save” and the configuration of the CoolSafe is transferred to the software, that is ready for
use now.
The main screen of the control software will show a diagram of the CoolSafe as it is actually
configured and equipped.
3
Using the control software
It is important to understand, that it is the controller on the main board of the CoolSafe that actually
runs the freeze dryer
– not the control software. With the control software it is possible to change the
settings of all user related parameters and to define freeze drying processes in manual and
automatic running mode.
Any changes made in the control software will remain there and not have any effect on the CoolSafe
until it has been send to the controller on the CoolSafe main board. To send data to the
“Send” button
in the
“Commando” box in the lower left-hand corner of the screen.
