37
Brightness Slider
– Moving the slider to the right will increase the brightness
level while moving the slider to the left will decrease the brightness level of
the display.
Touch Sounds
– With Touch Sounds turned ON, there will be an audible
sound each time a button on the display is touched. Pressing the Touch
Sounds button will toggle between ON & OFF.
Screen Timeout Function
– If this function is turned ON, the screen will go
into low power mode (sleep mode) when no screen touched have been
detected for the user set amount of time (Screen Timeout). Pressing the
Screen Timeout Function button will toggle between ON & OFF.
Screen Timeout
– This value can be set to 5, 10, 15, 30 min or 1, 2, 3 hours.
Network
If the DHCP Enabled button is turned ON and an ethernet cable is connecting the
freeze dryer to an active network, then the IP address, Subnet Mask, and Default
Gateway fields will be populated automatically. If the DHCP Enabled button is turned
OFF, these fields can be manually entered to establish a network connection. If you do
not know the proper information to enter in each of the Network fields, consult your IT
personnel.
