11
2: Before You Install
Before you install your Extraction Freeze Dryer, the site should be planned for
installation. Examine the location where you intend to install it. You must be certain that
the area is level and of solid construction. In addition, a dedicated source of electrical
power must be located near the installation site of the Extraction Freeze Dryer.
Refer to
Appendix C: Extraction Freeze Dryer Specifications
for complete electrical and
environmental conditions, specifications and requirements.
Electrical Requirements
The product models have the following electrical requirements.
Catalog Number
Electrical Circuit Requirements
*
Freeze Dryer
Tray Dryer
700821500
115V, 60 Hz, 20 A
1 Phase
115V, 60 Hz, 15 A
1 Phase
700821510
230V, 60 Hz, 10 A
1 Phase
230V, 60 Hz, 8 A
1 Phase
700821515
230V, 60 Hz, 10 A
1 Phase
230V, 60 Hz, 8 A
1 Phase
700821530
230V, 50 Hz, 10 A
1 Phase
230V, 50 Hz, 8 A
1 Phase
700821540
230V, 50 Hz, 10 A
1 Phase
230V, 50 Hz, 8 A
1 Phase
700821550
230V, 50 Hz, 10 A
1 Phase
230V, 50 Hz, 8 A
1 Phase
700821570
230V, 50 Hz, 10 A
1 Phase
230V, 50 Hz, 8 A
1 Phase
*Electrical Requirements, ‘V’ = VAC (Voltage with alternating current), ‘A’ = Amperes
A dedicated outlet with an appropriate circuit breaker should be located as close as
possible to the product. Consult your local electrical codes for properly rated circuit
breakers. For safe operation the dedicated outlet must provide a protective earthing
ground connection to the product.
Do not use any detachable power cord that is not adequately rated for the
unit.
Frequency must agree with the serial tag rating. Improper frequency will
damage the compressor.
Additional appliances on the same circuit may cause the current to exceed
the rating of the circuit breaker or fuse.
