NLB 60E Operation Manual
7
4.1 Unpacking
Carefully open the shipping carton and check for
any noticeable damage. Every Lab.gruppen product
is tested and inspected before leaving the factory
and should arrive in perfect condition. If found to be
damaged, notify the shipping company immediately.
Only the consignee may institute a claim with the
carrier for damage incurred during shipping. Be sure
to save the carton and packing materials for the
carrier’s inspection. Should you ever need to ship the
NLB 60E, always use the original packaging.
4.2 Mounting
The NLB 60E is one rack unit high (1U) and will fit
into a standard EIA 19” rack. The depth is 208mm
(8.2”).
The weight is approximately 2.25 kg (5 lbs.)
The NLB 60E may be mounted directly on top of other
products; there is no need for spacing in between
units, though this might enable more convenient
cabling on the rear panel.
4.3 Operating voltage
The NLB 60E contains an auto-sensing PSU accepting
line voltage between 100V and 240V AC, 50/60Hz.
Please make sure that the mains supply connection
is grounded and mounted according to local regula-
tions.
Power consumption is 35W maximum. Actual
consumption will depend upon the number of devices
supplied with 48V phantom power through the
NomadLink network.
InstALLAtIon 4
