LAB12 melto1
–
MC/MM Phono Preamplifier
Page
5
of
12
Unpacking
Melto1 should be removed from its box with care. Remove all the foam protective pieces of the box
before you unpack melto1. Unpack melto1 with your hands on both sides of the device.
Warnings
No user serviceable parts are included inside. Do not unscrew the cover; high voltages remain after
disconnecting from mains. In case your device requires any kind of service or upgrade, please ship or
take your equipment directly to Lab12 or to one of our authorized dealers or other qualified personnel.
Always use same type of fuse for replacement.
Installation & Placement
Melto1 should be placed on a solid flat surface. You should avoid placing it near a heat source as this
could compromise the performance and reliability. You should never place another component directly
on top of this device. Make sure that your melto1 has an adequate flow of air around it. Melto1 could be
warm in some points; this is normal and within parts
’ specifications. Take care of the front panel’s refined
finishing using a soft dry cloth. No need to use any sprays or polishes. Never use cleaners containing
abrasives, as this will damage the surface.