Page 91
Selections
Settings
– The sub-menus found in ‘Settings’ allow for configuration of the gas valve and the devices that can be
incorporated into the boiler. All of these items are set at the factory, so these menus will only be needed
if a valve or component is replaced or a units change is desired. When changes are made it is likely that
that the changes will need to be verified before the valve will operate using the changes.
Valve Proving Sequence
– Not available
Hi-Gas & Lo-Gas Pressure
– Not available
Fuel Air Ratio & Ignition
– The sub-menus found in ‘Fuel Air Ratio & Ignition’ allow for combustion setup, ignition
characteristics modification, loading and saving A/F curves and valve configurations.
Note your
location.
Selections
•
Valve Status
- This section gives general information about valve operation and hours and cycles.
• Setup & Tests
– Allows for valve settings adjustment, configuration of optional components on the boiler and
combustion setup of the boiler.
• Diagnostics
– Displays lockout history and detailed information on current valve lockouts.
From Valve 1, select Setup & Tests.
From Setup & Tests,
Select Settings.
The
O
MNI
T
HERM
