MANUAL FOR USE AND MAINTENANCE
6
LSC 008 REV. 01
1
2
x
Main switch
Water supply tap
y
z*
*
Distance between the back side of the machine and the wall.
min. 20 cm.
min. 40 cm.
min. 10 cm.
•
The electric plug needs to be in a position so that it can be easily reached.
•
Between the water mains and the water inlet pipe of the equipment, there must be a tap in order to stop
the water flowing in case of need (pict. 1).
•
The water mains pressure needs to be within the range 1 - 5 bar.
In case of lack of this last requirement, please consult the manufacturer.
WARNING!
The machine is supplied with no water inside the boiler to prevent serious damage if exposed to low
temperatures. The machine must be supplied with cold, drinkable water.
1
Y
X
1
a
2
X
1.5
INSTALLATION REQUIREMENTS MADE BY THE USER
The machine needs to be placed on a stable surface which grants a safe position.
Check this important requirement, since the manufacturer cannot be considered liable for any damage
caused by the instability of the equipment.
While prearranging the system, consider the hole on the bearing surface in order to carry out all electric and
water connections through the opening below where, if recommended by the installer, the water softner
needs to be placed.
A hole of
10x10 cm
is enough in the area (a) indicated in PICTURE 1.
The minimum space under the machine
needs to be:
- height
60 cm
- width
40 cm
- depth
40 cm
Summary of Contents for S1 Vivaldi
Page 1: ...LSC 008 REV 01 M A N U A L F O R U S E A N D M A I N T E N A N C E Vivaldi Vivaldi Vivaldi...
Page 2: ...MANUAL FOR USE AND MAINTENANCE 2 LSC 008 REV 01...
Page 14: ...MANUAL FOR USE AND MAINTENANCE 14 LSC 008 REV 01...
Page 15: ...MANUAL FOR USE AND MAINTENANCE LSC 008 REV 01 15 03 04 Realized by STUDIO 80 Bologna Italy...
