S1 Vivaldi II Owner’s Manual
Page 12
See table below:
Offset
91ºC
Lamp
92ºC
Lamp
93ºC
Lamp
94ºC
Lamp
95ºC
Lamp
96ºC
Lamp
97ºC
Lamp
ECON
Lamp
0ºC
Off
Off
Off
Off
Off
Off
Off
Off
-1ºC
On
Off
Off
Off
Off
Off
Off
Off
-2ºC
On
On
Off
Off
Off
Off
Off
Off
-3ºC
On
On
On
Off
Off
Off
Off
Off
-4ºC
On
On
On
On
Off
Off
Off
Off
-5ºC
On
On
On
On
On
Off
Off
Off
-6ºC
On
On
On
On
On
On
Off
Off
-7ºC
On
On
On
On
On
On
On
Off
-8ºC
On
On
On
On
On
On
On
On
4.10.2.2
Extended Temperature Offset Adjustment
Start with the machine in Standby mode (
ON/STBY
blinking green). Press and hold the
BOILER
button for about 10 seconds until the
Boiler
light and the
ON/STBY
light start
flashing. You are now in the temperature offset programming mode.
To enter a positive temperature offset between 0˚C and +8˚C push the
Single Cup
button. Each press will change the offset by +1˚C. An offset of 0˚C is designated by all
temperature lamps off. A +8˚C offset is designated by all temperature lamps plus
ECON
on. If your positive offset is more than you wish, each press of the
Double Cup
button
changes the offset by -1˚C.
To enter a negative temperature offset between 0˚C and -8˚C mode push the
Double
Cup
button. Each press will change the offset by -1˚C. An offset of 0˚C is designated
by all temperature lamps off. A -8˚C offset is designated by all temperature lamps plus
ECON
on. If your negative offset is more than you wish, each press of the
Single Cup
button changes the offset by +1˚C.
How Do I Tell If My Current Offset is Negative or Positive?
Example:
You enter Offset Programming mode and see that three lamps are on. This
can indicate either ±3˚C. Which is it? Since each press of the
Double Cup
button
changes the offset by -1˚C, press it and see what happens. There will either be two or
four lamps lit. If four lamps are lit the offset must have been -3˚C since pressing
Double Cup
always changes the setting by -1˚C with each press. If two lamps are lit
