La Crosse Technology, Ltd
Page 3
Note:
When the A/C adapter is NOT in use, the High-Low-OFF backlight feature is not available.
Note:
When the backlight is off, press any button to activate the backlight for 10 seconds, and then it will
turn off again.
Time is off by hours
The time is set manually.
Use the program menu to set the time.
Manually Set Time/Date: Program Menu
The SET button will move through the program menu. The
+
or
-
buttons will change a value.
HOUR: The hour will flash. Press and release the
+
or
-
buttons to select the correct hour. Confirm
with the SET button and move to the next item.
MINUTES: The minutes will flash. Press and release the
+
or
-
buttons to select the correct minutes.
Confirm with the SET button and move to the next item.
YEAR: The year will flash. Press and release
+
or
-
buttons to select the correct year. Confirm with
the SET button and move to the next item.
MONTH: The month will flash. Press and release the
+
or
-
buttons to select the correct month.
Confirm with the SET button and move to the next item.
DATE: The date will flash. Press and release the
+
or
-
buttons to select the correct date. Confirm
with the SET button and exit the program menu.
Note:
The Day of the Week will set automatically after the year, month and date are set.
Note:
If no buttons are pressed for 20 seconds, the set mode times out.
Set Time Alarm
Press and release the ALARM button to select Alarm 1 or Alarm 2.
ALARM HOUR: Hold the ALARM button to enter alarm time setting mode. The Alarm Hour will flash.
Use the
+
or
-
buttons to set the Hour. Press and release the ALARM button.
ALARM MINUTE: The Alarm Minutes will flash. Use the
+
or
-
buttons to set the Minutes. Press and
release the ALARM button to exit.
Activate/Deactivate Time Alarm
ACTIVATE:
Press and release the ALARM button to select Alarm 1 or Alarm 2.
With the Alarm time showing, press the ALARM ON/OFF button to activate the alarm. The alarm icon
(bell) appears when alarm is active.
DEACTIVATE:
With the Alarm time showing, press and release the ALARM ON/OFF button to deactivate the alarm.
The alarm icon will disappear when alarm is inactive.
Note:
When the alarm sounds, it will continue for two minutes then shut off.
Snooze Alarm
When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 9 minutes.
The alarm icon will flash when the snooze feature is active.
To stop alarm for one day, press ALARM button, while in snooze mode.
The alarm icon will remain solid.
USB Charge Port
Explanation:
The alarm clock has an integrated USB charging port (on back) that will charge a device
when the alarm clock is operated on AC power.
Note:
This is a power-output charging port. It does not supply power to the projection alarm.
Connect your external device’s USB charging cable (not included) to the USB charging port.
Charging times will vary.
