Page 3
Page 4
Page | 2
1.4” LED INSTA SET
ALARM CLOCK
Model: 30022
DC: 012819
POWER UP
1. Insert the 120 volt power cord into an outlet.
2. The clock will automatically show AM/PM, time, weekday, year, month
and date. Default time zone is set to Pacific Standard Time (PST).
TIME SETTING
1. Continuously hold down the TIME button while setting your hour and
minutes.
2. While holding the TIME button, press the HOUR button to set your hour.
Note:
The PM indicator will appear when you advance to PM time.
3. Press the MIN button to set your minutes.
4. Release the TIME button when the correct time is shown on the display.
TIME ALARM
ON:
Slide the ALARM ON/OFF switch to the ON position to turn the alarm
ON. The Alarm Light Indicator will appear.
OFF:
Slide the ALARM ON/OFF switch to the OFF position to turn the
alarm OFF. The Alarm Light Indicator will disappear.
ALARM ON/OFF
1. Continuously hold down the ALARM button while setting your alarm
time.
2. While holding the ALARM button, press the HOUR button to set your
alarm hour.
Note:
The PM indicator will appear when you advance to
PM time.
3. Press the MIN button to set your alarm minutes.
4. Release the ALARM button when the correct alarm time is shown on the
display.
SNOOZE
• When alarm sounds, press the SNOOZE/DIMMER button to silence alarm
for 9 minutes. Snooze function can be repeated many times if desired.
BATTERY BACKUP
• The clock has installed one CR2032 battery to maintain the Pacific Standard Time
setting.
• The battery will keep the alarm and time settings until the power is restored. Alarm
will not sound and the LED will not light-up.
• To replace the CR2032 battery, insert a screw driver into the slot of the battery
holder to remove the old battery. Insert a fresch battery. Positive is face up.
DST
ON / OFF
Switch
PM
INDICATOR
Light
ALARM
INDICATOR
Light
MODE
Button
ALARM
Button
TIME
Button
MINUTE / DATE
Button
TIME ZONE
Button
HOUR / YEAR / MONTH
Button
SNOOZE / DIMMER
Button
ALARM
ON / OFF
Switch
PM
AL
DST
TIME ZONE SELECTION
Press and release the TIME ZONE button to select one of four Time
Zones:
P
= Pacific (PST) •
M
= Mountain (MST) •
C
= Central (CST) or
•
E
= Eastern (EST)
SETTING DAYLIGHT SAVING TIME (DST)
• Slide the DST ON/OFF Switch to ON. The DST Indicator light will be on.
Your clock will move one hour ahead on the Second Sunday in March
and move one hour back on the First Sunday in November.
• If you do not observe Daylight Saving Time, slide the DST ON/OFF
Switch to OFF. Your clock will not change.
CALENDAR SETTING
1. Press the MODE button once to view the two digit year. Continuously
hold down the MODE button while pressing the HOUR button to set the
two digit Year.
2. Press the MODE button to move to Month and Date settings.
Continuously hold down the MODE button while pressing the HOUR
button to set the Month, and then press the MIN button to set the Date.
3.. Release the MODE button when the correct Year, Month and Date are
selected.
WARNING:
1. This product contains a Button Cell Battery.
2. If swallowed, it could cause severe injury or death in just 2 hours.
3. Seek medical attention immediately.
AVERTISSEMENT:
1. Cet article contient une pile bouton.
2. De graves blessures ou la mort pourraient suivre dans les deux heures
Suivant l’ingestion.
3. Demander l’aide de professionnels de la santé sur le champ.
WARNING - KEEP BATTERIES OUT OF REACH OF CHILDREN
1. Swallowing may lead to serious injury in as little as 2 hours or death, due to
chemical burns and potential perforation of the oesophagus.
2. If you suspect your child has swallowed or inserted a button battery, immediately
seek urgent medical assistance.
3. Examine devices and make sure the battery compartment is correctly secured,
e.g. that the screw or other mechanical fastener is tightened.
4. Do not use if compartment is not secure.
5. Dispose of used button batteries immediately and safely. Flat batteries can still
be dangerous.
6. Tell others about the risk associated with button batteries and how to keep their
children safe.
CLOCK DIMMER
• Press the SNOOZE/DIMMER button once for low light.
• Press the SNOOZE/DIMMER button again to go back to bright light.
CR
20
32
