La Crosse Technology, Ltd
Page 6
Activate/Deactivate Light Alarm
•
The alarm is active when set. The words LIGHT ALARM will show on the display.
•
Press the LIGHT ALARM button once to deactivate. Alarm time will show for 3 seconds.
•
Press LIGHT ALARM button again to activate for the same time.
•
The words LIGHT ALARM will show when alarm is active. The words will not show
when alarm is deactivated.
Will the light always start 30 minutes before the Light Alarm?
•
In the rare chance that the you set the light alarm, with less than 30 minutes before the
alarm time, the light brightness adjusts to the brightness level it should be at for the
time remaining before the alarm.
•
This may cause you to see a “jump” in the light level when it adjusts.
Sound Alarm
The SOUND ALARM will wake you to gentle melody that will increase in loudness over a 5
minute period.
1.
Hold the SOUND ALARM button to enter the Alarm Setting Mode. ALARM and the Hour
will show. Tap the + or – button to adjust the hour.
2.
Press the SOUND ALARM button, ALARM and the Minutes will show. Tap the + or –
button to adjust the minutes.
3.
Press the LIGHT ALARM button to select Snooze time (5 minutes to 120 minutes). Tap
the + or – button to select.
4.
Press the SOUND ALARM button to exit.
5.
The alarm is active when set.
Gradual Wake Up: The gentle Melody Sound Alarm will increase in volume over a 5-
minute period. Turn off a sounding alarm by pressing any button (except SNOOZE). After
the 5-minute time frame, the alarm will stop if not snoozed/deactivated.
Can I change sounds on my Sound Alarm ?
No. the only sound option is the melody.
Activate/Deactivate Sound Alarm
•
The alarm is active when set. The words SOUND ALARM will show on the display.
•
Press the SOUND ALARM button once to deactivate. Alarm time will show for 3
seconds.
•
Press SOUND ALARM button again to activate for the same time.
•
The words SOUND ALARM will show when alarm is active. The words will not show
when alarm is deactivated.
