La Crosse Technology, Ltd
Page 8
Check whether the DST indicator is ON or OFF. If the indicator is OFF the clock
will not change.
Check for fresh
. Without proper batteries, the antenna will have a
harder time picking up the signal.
Position the digital clock in a window (
with the front or back
) facing Ft. Collins,
Colorado and leave for up to five nights. If you do not have a window facing this
direction, position the clock near an outside wall and point the unit in this
general direction.
Manually Set Time/Date: Program Menu
There are seven function buttons: SET, + (PLUS), - (MINUS), ALARM and SNOOZE.
Time set order:
1. Beep ON/OFF
2. Atomic ON/OFF
3. DST ON/OFF (Daylight Saving Indicator)
4. Time Zone
5. 12/24 hour time format
6. Hour
7. Minutes
8. Year
9. Month
10. Date
11. Fahrenheit/Celsius
Note: Press SNOOZE at any time to exit all setting menus.
Note: 20 seconds without button press will return to normal time display.
1.
Hold the SET button for 3 seconds to enter set mode.
2.
BEEP ON will appear. Press the +/- buttons to turn OFF the beep sound.
3.
Press the SET button to confirm and select Atomic ON/OFF.
4.
ATOMIC ON will show. Press the +/- buttons to turn OFF the Atomic time signal.
Note: If ATOMIC is set to OFF, you will skip the next two items and go directly
to the hour.
5.
Press the SET button to confirm and select Daylight Savings Time ON/OFF.
6.
DST ON will show. Press the +/- buttons to turn that OFF if you do not observe
Daylight Saving Time).
7.
Press the SET button to confirm and select Time Zone.
8.
TIME ZONE EST will show. Press the +/- buttons to select your time zone.
AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST= Pacific, AKT=
Alaska, HAT=Hawaiian
9.
Press the SET button to confirm and select 12 hour or 24 hour time format.
10.FORMAT 12H will show. Press the +/- buttons to select 24H.
11.Press the SET button to confirm and select the hour.
12.HOUR will appear. Press the +/- buttons to adjust the hour.
13.Press the SET button to confirm and select the minutes.
14.MINUTES will appear. Press the +/- buttons to adjust the minutes.
15.Press the SET button to confirm and select the year
16.The YEAR will appear. Press the +/- buttons to adjust the year.
17.Press the SET button to confirm and select the month.
