La Crosse Technology, Ltd
Page 4
Set Time Alarm
You clock allows the option to set a single alarm, weekday alarm or weekend alarm.
Single
-Will alarm at the same time every day when active. (Clock icon only)
Mon-Fri
-Will only alarm Monday through Friday when active. (Clock icon with 5 lines below)
Weekend
- Will only alarm Saturday and Sunday when active. (Clock icon with 2 lines below)
• Press and release the ALARM button to view alarm time.
• With alarm time showing, hold the ALARM button for 3 seconds to enter alarm settings.
• Set the time then select alarm type: (Single alarm, Mon-Fri alarm, or Weekend alarm)
• Setting and activating the alarm are separate functions.
Set Alarm:
1. Press and release the ALARM button to view alarm time.
2. With alarm time showing, hold the ALARM button for 3 seconds to enter alarm time set mode.
3. Press the +/- buttons to adjust the alarm hour.
4. Press the ALARM button to confirm and move to the minutes.
5. Press the +/- buttons to adjust the alarm minutes.
6. Press the ALARM button to confirm and move to alarm type.
7. Use the +/– to select SINGLE, MON-FRI or WEEKEND alarm.
8. Press the ALARM button to confirm and exit.
Note:
This is a crescendo alarm. It will sound for two minutes then shut off completely if no buttons are
pressed.
Activate/Deactivate Time Alarm
When you finish settings, the alarm is active.
From the normal time display, press and release the ALARM button to view alarm.
Press and release the ALARM button to deactivate or to activate the alarm.
When active the alarm clock icon will show.
The clock icon will not show if the alarm is not active.
Snooze Alarm
When the alarm sounds, press the SNZ/LIGHT button. The alarm will be silent for the preselected
snooze duration. Snooze duration is set in the
SNOOZE - duration will show, and the snooze time will count down.
When alarm sounds again, the SNOOZE - 0 will flash.
USB Charge Port
Explanation:
The alarm clock has two integrated USB charging ports that will charge a device when
operating on AC power.
• Charge devices that self-regulate.
• Do not charge multiple devices from the same USB port.
• For Tablets and other high power devices, use the USB port on the right (2 Amp).
• Must operate clock with power cable to charge other devices.
• Plug your device into one of the USB ports on the front of the clock.
• The clock will show HELLO for 3 seconds.
• The lightning bolt will flash while charging.
• When no device is connected, no battery will show.
• As your device becomes full and less current is drawn, solid battery icon may show, before the charge is
complete.
USB Output:
Left USB Port: 1 Amp output