La Crosse Technology, Ltd
Page 2
We suggest name brand Alkaline batteries for your clock.
A minimum voltage of 1.48V for each battery is necessary for proper performance.
Use batteries dated at least six years in advance of the current year. Batteries dated earlier than six
years from now may still work, but may be unstable in performance.
Good name brand batteries make less noise, which reduces the chance of RF (radio frequency)
interference from the battery compartment.
Alarm Clock Factory Restart
Explanation:
The factory restart returns the alarm clock to an “out-of-the-box” state and often resolves an
issue.
Factory Restart:
1. Remove all power (batteries and AC) from the alarm clock.
2. Press one of the buttons on the alarm clock at least 20 times to clear all memory.
3. Verify that the alarm clock is blank before proceeding.
4.
Leave without power for 15 minutes
(very important).
5. Insert the AC adapter into the wall outlet then into the alarm clock.
6. Set time, date, etc.
Language
This clock will show the weekday and directions in English (default) or Spanish (Española).
Use the
Turn off Beep with button press
Use the
to select BEEP OFF. The clock will not beep when a button is pressed.
12-Hour Time Format
This clock only has 12-hour time format.
Fahrenheit/Celsius
Use the
to display the indoor temperature in Fahrenheit or Celsius.
Insert fresh alkaline batteries with correct polarity.
If the indoor temperature is still shows dashes, HH.H or LL.L, the alarm clock may need replacement.
Does the clock have a backlight?
Yes, this alarm clock has a backlight.
AC adapter:
The backlight can show continuously when operating the alarm clock with the 5-volt AC adapter.
HIGH: The backlight is defaulted to HI (brightness) when the AC adapter is in use.
LOW: Press and release the SNOOZE/LIGHT button to
dim
the intensity of the backlight.
OFF: Press and release the SNOOZE/LIGHT button to turn the backlight off to sleep.
Note:
When the AC adapter is NOT in use, the HIGH-LOW-OFF backlight feature is not available.
Note:
When the backlight is off, press any button to activate the backlight for 10 seconds, and then it will
turn off again.
Battery power:
Press and release the SNOOZE/LIGHT button and the backlight will show for 10 seconds, when
operating on batteries only.