La Crosse Technology, Ltd
Page 3
Activate/Deactivate Time Alarm
The alarm will be active when set. Alarm Time and Icon will show.
Deactivate:
•
Press and release the ALARM button to deactivate the alarm. Alarm time will show
briefly for 3 seconds.
•
Alarm Icon (bell) will no longer show.
Activate:
•
Press and release the ALARM button to activate the alarm. Alarm time will show
briefly for 3 seconds.
•
When alarm time is active, the Alarm Icon (bell) will.
Snooze Alarm
•
When the alarm sounds, press and release the SNOOZE button to silence the alarm
for 10 minutes.
•
Alarm Icon (bell) will flash every second during snooze time.
•
Snooze can be repeated if SNOOZE button is pressed again when alarm sounds.
Note: Alarm is crescendo sound. When the alarm sounds, it continues for 2 minutes
and then shuts off completely.
Day of the week is incorrect.
•
. The day of the week sets
automatically based on the setting of the year, month and date.
Digital clock has missing segments
Explanation: When parts of numbers, letters, or pictures are missing on the display, it is
often power related.
•
With all power removed, the digital clock should be blank.
•
If numbers still appear, please check for scratch guard.
Power:
•
Check that the batteries are installed correctly.
•
This is generally a power related issue.
•
may be overpowered or underpowered.
•
Remove batteries from digital clock.
•
Press any button 20 times. Leave the batteries out of the display for 2 hours.
•
Insert batteries into the digital clock.
