24
MANUAL SETTINGS
Note:
If the weather wall clock has already successfully received the DCF time signal and
displays the correct time and date, then the Manual settings can be skipped.
After completion of the above described procedures in “Setting up”, the manual setting modes
can be entered by pressing the SET key. The following settings can now be programmed:
•
Time zone setting
•
Language display setting
•
Manual time setting
•
Year setting
•
Month setting
•
Day setting
•
Weekday setting
•
ºC or ºF setting
TIME ZONE SETTING
After entering the manual setting mode as described above, the time zone can be set between
the 0 to -12 hour and then runs from 12 back to 0 in consecutive 1-hour interval. To do this:
1.
The current time zone value starts flashing.
2.
Use the + key to set the time zone. The range runs from 0 to -12 and then runs from 12
back to 0 in consecutive 1-hour interval.
3.
Press and release the SET key to enter the “Language Setting”.
LANGUAGE SETTING
The weekday can be displayed in LCD2 with the pre-set languages: US English, German, and
French. (default language: German)
