32
POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER
The remote temperature transmitter can be placed onto any flat surface
or wall mounted using the bracket which doubles as a stand or wall
mount base.
To wall mount:
1.
Secure the bracket onto a desired wall using the screws and plastic
anchors.
2.
Clip the remote temperature transmitter onto the bracket.
Note:
The mounting surface can affect the transmission range. If, for instance,
the unit is attached to a piece of metal, it may then either reduce or
increase the transmitting range. For this reason, we recommend not to
place the unit on any metal surfaces
or in any position where a large metal or highly polished surface is in the immediate vicinity
(garage doors, double glazing, etc.). Before securing in place, please ensure that the
Temperature Station can receive the 868MHz signal from the temperature transmitter at the
positions that you wish to place them.
CARE AND MAINTENANCE:
•
Avoid placing the units in areas prone to vibration and shock as these may cause
damage.
•
Avoid areas where the units can be exposed to sudden changes in temperature, i.e.
direct sunlight, extreme cold and wet/moist conditions as these will lead to rapid changes
which reduces the accuracy of readings.
•
When cleaning the LCD and casing, use a soft damp cloth only. Do not use solvents or
scouring agents.
•
Do not submerge the units into water.
