background image

 

28

THE WEATHER FORECASTING ICONS: 

There are 3 weather icons on the middle section of LCD 2, which can be displayed in any of the 
following combinations: 
 
 
 
 

 

 

          SUNNY          CLOUDY WITH SUNNY INTERVALS               RAINY 

 

For every sudden or significant change in the air pressure, the weather icons will update 
accordingly to represent the change in weather. If the icons do not change, then it means either 
the air pressure has not changed or the change has been too slow for the Weather Station to 
register. However, if the icons displayed is a sun or raining cloud, there will be no change of 
icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since the icons 
are already at their extremes. 

 

The icons displayed forecasts the weather in terms of getting better or worse and not 
necessarily sunny or rainy as each icon indicates. For example, if the current weather is cloudy 
and the rainy icon is displayed, it does not mean that the product is faulty because it is not 
raining. It simply means that the air pressure has dropped and the weather is expected to get 
worse but not necessarily rain. 

 

Note: 

 

After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. 
This will allow sufficient time for the Weather Station to collect air pressure data at a constant 
altitude and therefore result in a more accurate forecast. 
Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather 
forecasting feature is estimated to have an accuracy level of about 75% due to the varying 
areas the Weather Station has been designed for use in. In areas that experience sudden 
changes in weather (for example from sunny to rain), the Weather Station will be more 
accurate compared to use in areas where the weather is stagnant most of the time (for 
example mostly sunny). 

 

If the Weather Station is moved to another location significantly higher or lower than its initial 
standing point (for example from the ground floor to the first floor of a house), remove the 
batteries and re-insert them after about 30 seconds. By doing this, the Weather Station will not 

Summary of Contents for WS6158-IT

















Reviews: