41
2. Clip the remote temperature transmitter onto the
bracket.
Note:
The mounting surface can affect the transmission range. If, for instance,
the unit is attached to a piece of metal, it may then either reduce or
increase the transmitting range. For this reason, we recommend not to
place the unit on any metal surfaces or in any position where a large
metal or highly polished surface is in the immediate vicinity (garage
doors, double glazing, etc.). Before securing in place, please ensure that
the Temperature Station can receive the 915MHz signal from the
temperature transmitter at the positions that you wish to place them.
CARE AND MAINTENANCE:
Extreme temperatures, vibrations and shocks should be avoided as
these may cause damage to the unit and give inaccurate forecasts
and readings.
When cleaning the display and casings, use a soft damp cloth only.
Do not use solvents or scouring agents as they may mark the LCD
and casings.
42
Do not submerge the units in water. Furthermore, fix all parts in
place where the units are adequately protected against moisture
and rain.
Immediately remove all low powered batteries to avoid leakage and
damage. Replace only with new batteries of the recommended
type.
Do not make any repair attempts to the unit. Return them to their
original point of purchase for repair by a qualified engineer.
Opening and tampering with the unit may invalidate their
guarantee.
Do not expose the units to extreme and sudden temperature
changes, this may lead to rapid changes in forecasts and readings
and thereby reduce their accuracy.
SPECIFICATIONS:
Temperature measuring range:
Indoor
: 14.2ºF to 139.8ºF with 0.2ºF resolution
-9.9ºC to +59.9ºC with 0.1°C resolution
(“OF.L” displayed if outside this range)
43
Outdoor
: -39.8ºF to +139.8ºF with 0.2ºF resolution
-39.9ºC to +59.9ºC with 0.1°C resolution
(“OF.L” displayed if outside this range)
Indoor humidity range
: 1% to 99% with 1% resolution
(Display “- -“ if temperature is OL.F; display “- -“ if < 1% and “99%” if >
99%)
Outdoor humidity range : 1% to 99% with 1% resolution
(Display “- -“ if outside temperature is OF.L; display 1% if < 1% and 99%
if > 99%)
Interior data checking intervals
Indoor Temperature
: Every 15 seconds
Humidity
: Every 20 seconds
Air pressure checking interval : Every 15 seconds
Outdoor temperature and humidity data checking interval:
- Every 4 seconds
Transmission range
: up to 330 feet (open space)
Power consumption:
(alkaline batteries recommended)
Weather station
: 2 x C, IEC LR14, 1.5V
Thermo-hygro transmitter
: 2 x AA, IEC LR6, 1.5V
44
Battery life
: up to 24 months
Dimensions (L x W x H):
Weather station
: 7.49“ x 1.33“ x 7.65“ / 190.4 x 37 x 190.4 mm
Thermo-hygro transmitter : 1.50” x 0.83” x 5.05” /
38.2mm x 21.2mm x 128.3mm
WARRANTY
La Crosse Technology, Ltd provides a 1-year limited warranty on this
product against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only
on products purchased and used in North America and only to the original
purchaser of this product. To receive warranty service, the purchaser
must contact La Crosse Technology, Ltd for problem determination and
service procedures. Warranty service can only be performed by a La
Crosse Technology, Ltd authorized service center. The original dated bill
of sale must be presented upon request as proof of purchase to La
Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized
service center.
La Crosse Technology, Ltd will repair or replace this product, at our
option and at no charge as stipulated herein, with new or reconditioned
